Hosco Japan H NF 042 nut file 15 cm length

nut file 15 cm length, teeth per inch: 78, 042" / 1,07 mm

A high quality nut file. A string seated in a properly filed nut will have the correct height and will also prevent extraneous string noise from the nut.

0.042" / 1,07 mm width.

A typical set for classical guitar would contain the following files:

0.028", 0.032", 0.036", 0.042"

A typical set for electric and acoustic guitars will depend on the string gauges. Always check the package for the string gauges and use the same file gauge accordingly.
A great aid in filing nuts is the H-GB4 Hosco GrooBar. This will prevent you from filing the string slot too deep.

€ 26.25

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H NF 046 nut file 15 cm length

nut file 15 cm length, teeth per inch: 78, 046" / 1,17 mm

A high quality nut file. A string seated in a properly filed nut will have the correct height and will also prevent extraneous string noise from the nut.

0.046" 1,17 mm width.

A typical set for classical guitar would contain the following files:

0.028", 0.032", 0.036", 0.042"

A typical set for electric and acoustic guitars will depend on the string gauges. Always check the package for the string gauges and use the same file gauge accordingly.
A great aid in filing nuts is the H-GB4 Hosco GrooBar. This will prevent you from filing the string slot too deep.

€ 26.25

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H FE3 fret end file (pencil like shape) for precise filing

fret end file (pencil like shape) for precise filing, for wide frets (R=3mm)

Three files in one! One concave, one fine toothed side and one extra fine toothed side.

The concave fret end file is the perfect tool to use after bevelling the fret ends.
This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 1 mm.
The sides have one fine and one superfine file surface as well to use in removing burrs.
Length 16 cm

This H-FE3 is for wide frets.

€ 53.00

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H NF11 set of 11 thin nut files

set of 11 thin nut files

Set of 11 high quality nut files. The most common thicknesses are included in this set, inlcuding a .050" This set will ensure a proper seated string that not only is set at the correct height, but will also prevent string noise from the nut.

Files: 010", 013", 016", 024", 028", 032", 036", 042", 046", 050 ", 056"
Files: 0,25 mm, 0,33 mm, 0,41 mm, 0,61 mm, 0,71 mm, 0,81 mm, 0,91 mm, 1,07 mm, 1,17 mm, 1,27 mm, 1,42 mm

A great aid in filing nuts is the H-GB4 Hosco GrooBar. This will prevent you from filing the string slot too deep.

€ 170.10

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H FL160S fret levelling file

fret levelling file, 160 mm (L) x 28mm (W) x 5 mm (D), single cut teeth per inch: 20 cut

€ 33.75

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H NF 050 nut file 15 cm length

nut file 15 cm length, teeth per inch: 78, 050" / 1,27 mm

A high quality nut file. A string seated in a properly filed nut will have the correct height and will also prevent extraneous string noise from the nut.

0.050" / 1,27 mm width.

A typical set for classical guitar would contain the following files:

0.028", 0.032", 0.036", 0.042"

A typical set for electric and acoustic guitars will depend on the string gauges. Always check the package for the string gauges and use the same file gauge accordingly.
A great aid in filing nuts is the H-GB4 Hosco GrooBar. This will prevent you from filing the string slot too deep.

€ 26.25

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H NF 056 nut file 15 cm length

nut file 15 cm length, teeth per inch: 66, 056" / 1,42 mm

A high quality nut file. A string seated in a properly filed nut will have the correct height and will also prevent extraneous string noise from the nut.

0.056" / 1,42 mm width.

A typical set for classical guitar would contain the following files:

0.028", 0.032", 0.036", 0.042"

A typical set for electric and acoustic guitars will depend on the string gauges. Always check the string package for the string gauges and use the same file gauge accordingly.
A great aid in filing nuts is the H-GB4 Hosco GrooBar. This will prevent you from filing the string slot too deep.

€ 26.25

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H IDP 410 dual grit mini diamond plates

dual grit mini diamond plates, for honing sharp fret ends and sharpening knives, 400/1000 grit

This compact dual grit diamond plate is ideal for honing sharp fret ends or for sharpening tools.
The diamond surface makes for clean, precise and fast filing. The material is very durable and this file will last a very long time. Diamond files work on both strokes, back and forth. It will leave a smoother surface without chattering.

One side is 150 grit, the other side is 600 grit. size:30 x 100 mm

€ 30.00

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H FE1 fret end file (pencil like shape) for precise filing

fret end file (pencil like shape) for precise filing, for small frets (R=1mm)

Three files in one! One concave, one fine toothed side and one extra fine toothed side.

The concave fret end file is the perfect tool to use after bevelling the fret ends.
This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 1 mm.
The sides have one fine and one superfine file surface as well to use in removing burrs.
Length 16 cm

This H-FE1 is for small frets.

€ 53.00

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H NF10 set of 10 thin nut files

set of 10 thin nut files

Set of 10 high quality nut files. The most common thicknesses are included in this set. This set will ensure a proper seated string that not only is set at the correct height, but will also prevent string noise from the nut.

Files: 010", 013", 016", 024", 028", 032", 036", 042", 046", 056"
Files: 0,25 mm, 0,33 mm, 0,41 mm, 0,61 mm, 0,71 mm, 0,81 mm, 0,91 mm, 1,07 mm, 1,17 mm, 1,42 mm

A great aid in filing nuts is the H-GB4 Hosco GrooBar. This will prevent you from filing the string slot too deep.

€ 153.90

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H FCF600 3 in 1 diamond fret crown file three width sizes

3 in 1 diamond fret crown file three width sizes

High quality diamond grit file for crowning frets after levelling.
Three sided for narrow, medium and wide frets. The narrow part is narrow enough for mandolin frets, the wide part is wide enough for jumbo frets.
Crown file for small (R=1mm), medium (R=2mm) or wide frets (R=3mm) frets.

The diamond surface makes for clean, precise and fast filing. The material is very durable and this file will last a very long time. Diamond files work on both strokes, back and forth. It will leave a smoother surface without chattering.

€ 178.20

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H IDP 156 dual grit mini diamond plates

dual grit mini diamond plates, for honing sharp fret ends and sharpening knives, 150/600 grit

This compact dual grit diamond plate is ideal for honing sharp fret ends or for sharpening tools.
The diamond surface makes for clean, precise and fast filing. The material is very durable and this file will last a very long time. Diamond files work on both strokes, back and forth. It will leave a smoother surface without chattering.

One side is 150 grit, the other side is 600 grit. size:30 x 100 mm



Dit product is per 2020-07-06 00:00:00 weer voorradig.

€ 30.00

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H FE2 fret end file (pencil like shape) for precise filing

fret end file (pencil like shape) for precise filing, for medium frets (R=2mm)

Three files in one! One concave, one fine toothed side and one extra fine toothed side.

The concave fret end file is the perfect tool to use after bevelling the fret ends.
This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 2 mm.
The sides have one fine and one superfine file surface as well to use in removing burrs.
Length 16 cm

This H-FE2 is for medium frets.

€ 53.00

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product