NUX NBK 5 Verdugo Series analoge compressor en boost pedaal

analoge compressor en boost pedaal, MASAMUNE

Masamune is a legendary Japanese swordsmith of the Kamakura period (1185–1333). He produced some of the finest blades known to man. The name Masamune is synonymous with quality, so here at NUX, we forged a design of combined circuits, compression, dry signal, 2 gain stage of FET boost, routing...

ENTER the NUX MASAMUNE a pedal that offers huge razor-sharp dynamic sound, the quality on the level of a Japanese Katana, and not just any katana, it's MASAMUNE!

Both pedals are now available in one convenient metal housing, and it comes with selectable signal routing. The Boost Section comes with Boost Level, Drive, and Hi-Cut controls. The Compressor Section comes with Komp Level, Sustain, Blend, and Clip controls. The Masamune has an external foot-switch jack Input, you can easily operate the pedal by using an additional remote switch.

NUX Masamune is a sound-crafter pedal

It forges your dry-signal, enhancing your sound before sending your signal to your amp, and/or any effects unit. The Booster adds beneficial color to your signal, and, if necessary, after you adjust the boost & drive levels, you can cut high frequencies on your Input signal with the Hi-Cut Toggle Switch.

Masamune’s Kompressor does a remarkable job managing and enhancing your signal: Komp Level knob adjusts the final Output level for the Compressor, perfectly balancing your Input and Output signals. Sustain knob adjusts the compression ratio, and increases sustain. Higher sustain levels will squash your signal harder when you hit the strings and creates a longer, richer sustain. Blend knob adjusts the compressor transparency from 50% to 100%, so you can dial-in the exact amount of compressed dry-signal blend you want.

Clip Toggle allows you to choose the clipping range of your Input signal. The Toggle-UP position will squeeze the signal for voluminous sound, and Toggle-DOWN will open up more space on your clipping range.



€ 127.05

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX KOMPCDLX Core Series compressor pedaal KOMP CORE DELUXE

compressor pedaal KOMP CORE DELUXE

Multi-function analog compressor pedal featuring a wide variety of compressor tones

You want a compressor that doesn't color your sound?
Komp Core Deluxe is a multi-function analog compressor pedal featuring a wide variety of compressor tones. 3 different clip modes and precise knobs provide a wide range of taste. Sustain, Attack and Blend knobs allow you to have a good control perspective on signal and you can give a good sustain with low noise and adjust input sensitivity precisely.

Nux Komp Core Deluxe can be as transparent or as squishy as you like.
A volume knob and a blend knob to bring in or out the original dry signal and a simple 3-way mini toggle to choose the compression intensity without sound coloration come together.

Clip Mode - Classic Compression
Low output pick-ups doesn't hit the threshold, using Komp Core Deluxe on Clip Mode suits single-coil guitars better.

Clean Mode and Normal Mode
Output of the humbucker pickups slam the compressor limits too hard, Clean Mode is perfect for smoothing the sound, no nasty spikes on any frequencies. Normal Mode compression level is adjusted between Clip and Clean compression levels, it can be selected for mid-out pickup systems.

Blend Circuit
If you need full compression, Komp Core Deluxe can do it. But when the blend knob is set at 12 o'clock, it does its magic to keep the pedal always on and doesn't even squash your sound with compression. It means it's very transparent and blended with the guitar signal. It also works great as a clean boost, though you can use it for that purpose.

Komp Core Deluxe will add an amazing impact to your tone and provide endless sustain.
Whether your guitar volume is low or high or wherever you play, Komp Core Deluxe adds an amazing sustain and holds it forever. It sounds like the best part of a song that no one wants to end.

€ 83.79

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX MODCDLX Core Series modulatie pedaal MOD CORE DELUXE

modulatie pedaal MOD CORE DELUXE

Richest modulation pedal, beautiful sound colorization.

Nux Mod Core Deluxe


Mod Core Deluxe is a fully-featured pro-quality modulation effects pedal. Add-in Rate and Depth controls to adjust main parameters and Tweak control to manipulate key parameters for each effect, and you get more tone-shaping options than you’ll ever find in a modulation pedal. It has 8 modulation effects with 2 types of algorithms fitting every musician's needs for sound improvement and colorization.

Overall look on all the effects and Tweak Knob


Normal Mode Deluxe Mode Tweak Knob
Chorus Tri-Chorus Blend
Flanger Tape Flanger Feedback
Phaser 8-Stage Phaser Feedback
Tremolo Optical Tremolo Width
Pan Pan with Hi-Lo Cut Width
Rotary Rotary w/ Speaker Cab Sim Bass Speaker and Horn Level Balance
U-Vibe (Chorus) U-Vibe (Vibrato) Volume
Vibrato Vibrato (Momentary Control) Volume

Stereo Connection
It has Stereo Inputs and Outputs for a better experience and flexible routing, you can use Mod Core Deluxe in any effect chains with different connection methods.


Tone Lock Function
T-Lock is a physical dead-man switch designed to protect your parameter tweaks during your performance.






Dit product is per 2020-06-18 00:00:00 weer voorradig.

€ 83.79

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX NDR 5 Verdugo Series digitale delay en reverb pedaal met tap tempo freeze en shimmer

digitale delay en reverb pedaal met tap tempo freeze en shimmer, ATLANTIC

Multi Delay and Reverb effect pedal with inside routing and secondary reverb effects.

One of the best Delay and Reverb algorithms in a metal box. Special select 3 classic Delays & 3 classic Reverbs . . . and we added a bonus “Shimmer” and "Freeze" effects which let you create a dreamy waterfall shimmer~ especially handy for intros, interludes, and endings. And now, because of NUX’s latest Core Image Technology, the new Verdugo Series effect pedals offer pro-level sound enhancement.

NUX Atlantic Delay effects
70’s (40ms - 400ms): Retro-delay meets modern technology, without losing the realistic BBD-effected repeats, so essential for capturing the 70’s retro feel.

60’s (55ms - 550ms): A warm & dusty tape-echo machine effect, packed with an array of analog-only goodies. Saturated colors that turn any sound into vintage. Tweak the Repeat knob to the max and use the Time knob to get an experience, just like the real Tape-Echo Machine.

80’s (80ms - 800ms): A digital era invention, crystal clear repeats. Digitally-copied clean repeats carry your signal without absolutely zero color particles. This is the best option if you don’t want to mix your favorite chorus with another colorization effect--or your favorite modulation effect.

SMART TAP TEMPO: Instantly synch-up your delays with the tempo you want to accompany. Simply tap the tempo with your foot. TAP TEMPO Speed range is 125 ms - 1500 ms for all delay types.

Before you set the TAP TEMPO, use the Time Knob and choose any desired time signature to change the TAP division. When TAP TEMPO is engaged, your repeats will create a delay pattern according to the selected time signature.

NUX Atlantic Reverb effects
*The Atlantic has 3 types of reverb effects and each type has a secondary effect. When any of the reverb effect is ON, hold down the reverb footswitch to activate the secondary effect.

Spring Reverb & Freeze: Creates a polyphonic atmosphere filter that catches the sound reflections from deep down spring reverb tank. You can adjust the tank size with the level knob and set the reflection distance with the decay knob. When the effect is ON, holding down the reverb switch delivers the infinite sustain as long as you hold the footswitch.

Plate Reverb & Shimmer: Straight and clean reflections inside a flat-walled room. You can control the room-size with the Level knob and then tweak the Delay bounce point with the Decay knob.
If you hold down the Reverb switch, straight reflections will be heated and swirled throughout the inside of the room creating a Shimmer effect.

Hall Reverb & Freeze: The sound of a well-designed hall. Whether the hall size is big or small, the reflections will be emitted by wall furniture. You can adjust the interior hall-size, from a small garage to a huge structure with the Level knob and increase or decrease the number of objects on the walls with the Decay knob. Less decay means more objects and faster reflection fading.


Inside Routing
NUX Atlantic Delay & Reverb pedal also has inside routing-control between the effects so you can choose which effect comes first. On Serial Mode, you can create a deep-reflection reverb with wet or dry repeats, or you can split your guitar signal, and add both effects in the parallel chain. Each effect will be mixed with separated dry signals.

Input/Outputs
It has a 6.35 mm stereo input and 2 outputs for the ultimate delay and reverb experience.

By plugging a TRS cable into the pedal's input, you can add the Atlantic to any effect chain via Send/Return connection by using a “Y” cable or “Insert” cable.

It has an Input Level toggle switch, so you can optimize the input signal with your signal level. It adjusts the input impedance, if the input signal is too loud, switch to +4 dB to increase the headroom.

Main Features:
3 typical Delays with Smart Tap Tempo and sub-division
3 great Reverbs with secondary function by holding foot-switch
Versatile routing options




Dit product is voor onbekende tijd uitverkocht.

€ 158.80

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX MFX 10 gitaar multi effect pedaal met versterker modelling loop station en drum machine

gitaar multi effect pedaal met versterker modelling - loop station en drum machine

A total of 55 models, up to eight can be used simultaneously 19 classic amp and pedal models with A/B channel switching Vintage 3-band passive EQ for every amp model
Parametric EQ with extra middle frequency sweep control for pedals 12 cabinet models provide two different modes for guitar amplifier or mixer/PA input
Built-in drum machine with CD quality PCM sounds Up to 20 seconds phrase loop with sound on sound The AUX IN jack makes it easy to practice along with MP3, CDs and other inputs The expression pedal lets you adjust the volume or effects parameters in real time Big backlit 160 x 128 TFT LCD for clear, easy viewing of the device’s name, parameters, tuner display etc A total of 72 presets: 36 factory + 36 user presets. The A/B switch allows you to use up to 144 presets
New generation 32-bit DSP, High Performance 24 Bit/ 48kHz AD/DA convertors Latest TS/AC (True Simulation of Analog Circuits) Technology duplicates the distortion and tone shape of tube and vintage effect pedals.

A total of 55 models, up to eight can be used simultaneously
19 classic amp and pedal models with A/B channel switching
Vintage 3-band passive EQ for every amp model
Parametric EQ with extra middle frequency sweep control for pedals
12 cabinet models provide two different modes for guitar amplifier or mixer/PA input
Built-in drum machine with CD quality PCM sounds
Up to 20 seconds phrase loop with sound on sound
The AUX IN jack makes it easy to practice along with MP3, CDs and other inputs
The expression pedal lets you adjust the volume or effects parameters in real time
Big backlit 160 x 128 TFT LCD for clear, easy viewing of the device’s name, parameters, tuner display etc
A total of 72 presets: 36 factory + 36 user presets. The A/B switch allows you to use up to 144 presets
New generation 32-bit DSP, High Performance 24 Bit/ 48kHz AD/DA convertors
Latest TS/AC (True Simulation of Analog Circuits) Technology duplicates the distortion and tone shape of tube and vintage effect pedals



Dit product is per 2020-06-18 00:00:00 weer voorradig.

€ 157.75

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX PT 6 Core Series stemapparaat pedaal

stemapparaat pedaal, true bypass

Very sensitive chromatic tuning mode with a wide range.

Bright LED screen allows a clear visibility both on stage and outdoors. True Bypass Circuit allows tuning without any signal loss or latency. If signal is lost after 5 minutes, power save function will shut the pedal off automatically.



Dit product is per 2020-06-18 00:00:00 weer voorradig.

€ 49.39

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX NCH 1 Mini Core Series rotary pedaal MONTEREY VIBE

rotary pedaal MONTEREY VIBE

NUX Monterey Vibe, born to recreate the grand, yet complex, psychedelic rock guitar sound of the 1960's and 70's.

NUX Monterey Vibe, born to recreate the grand, yet complex, psychedelic rock guitar sound of the 1960's and 70's. It features all of the classic Uni-vibe style selections: Chorus, Rotary-Speaker, and Phaser pedal. We modernized the original 4 stage phaser circuit ( a pulsating bulb surrounded by 4 photo-resistors ) by replacing it with a powerful 32Bit floating DSP to process our custom algorithm. What was the outcome? A perfect mimic of the complex physical-phenomena of its original analog circuitry.

NUX Monterey Vibe generates a truly unique effect tone; a mix of chorus, tremolo, rotary, and phaser. This unique tone can be found in Pink Floyd’s ‘Breathe’, Robin Trower’s ‘Bridge of Sighs’, and the haunting audio mood created for ‘Machine Gun’ by Jimi Hendrix.

The earliest Uni-Vibe effect pedal came out in the 1960‘s. Cutting-edge guitarists were seeking a replacement for the heavy rotary speaker amplifier--configured from a standard amplifier for the electronic pipe organ. The original Leslie speakers did have a charm of their own, but it was more than compensated for by gaining the phaser effect, and the ease-of-use of a simple pedal configuration.

Just like the traditional Uni-Vibe pedal, you can switch between Chorus ( the Uni-vibe effect ) or Vibrato, by simply holding the foot-switch. In Chorus mode, the mix of Phaser and dry guitar signals produces a classic Rotary sound. In Vibrato mode, your pitch modulates between high and low. Both modes yield a rich, vintage vibe at any speed, intensity, or volume.

€ 76.15

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX NCP 2 Mini Core Series compressor pedaal SCULPTURE

compressor pedaal SCULPTURE

NUX Sculpture Compressor

NUX Sculpture Compressor pedal offers a consistent volume output level and sharpens the signals on top and bottom edges. When you start picking your guitar, it will clean the loud (peak) notes and increase the sustain by raising the level of decaying (quiet) notes. Sculpture also contributes to the signal foundation that’s fed into the rest of your effects chain.

It has 2 clip modes, simply you can switch between “Clean Mode” and “Clip Mode” by holding the switch for 1 second.

€ 61.45

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX NSS 5 Verdugo Series versterker cabinet en microfoon simulator pedaal

versterker cabinet en microfoon simulator pedaal, SOLID STUDIO

The New Era of Mic-ing!

NUX Solid Studio was created and designed to address: limited gear availability, and the cumbersome transport reality of physical amp/speaker cabinets.

NUX is proud to introduce the new Verdugo series Solid Studio IR & Power Amp simulator, a pedal version of the most classic amp/cabinet scenarios including microphones and power amp tubes. Over many years of research, Solid Studio was specifically developed to fill the essential needs of discerning musicians and sound technicians, including the art of mic-ing instrument amplifiers on stage or in the studio. Solid Studio provides ease-of-use, reliability, versatility, and, above all, incredible audio quality.

Virtual mic-ing is achieved by choosing 1 cabinet and 1 microphone, and fine-tuning the position of the microphone using the mic position switch. Plus, you can add the tube sound by engaging the power amp simulation.

What's Inside?

Solid Studio comes with 8 speaker cabinet simulations. All the cabinet models inside the Solid Studio are sounds great as original as the way it feels.

And there are 8 microphone models you can combine with any cabinets. Also, you can adjust microphone position for fine tuning.

Solid Studio Power Amp Simulation produces a warm tube-like sound and you can choose one of three power tubes for your essential sound needs.

Complete list of the built-in speaker cabinets and the microphones

8 Built-in Cabinets:
JZ120Roland Jazz120
DR112Fender Deluxe Reverb 112
BS410Fender Bassman 410
A212VOX AC30 212
TR212Fender Twin Reverb 212
1960Marshall 1960A 412
GB412Celestion Greenback 412
V412Celestion Vintage30 412

8 Microphones:
DYN421Sennheiser MD421
S57Shure SM57
U87Neumann U87
R122Royer R-122
R121Royer R-121
C414AKG C414
C3000AKG C3000
B52Shure Beta52

All product and brand names seen on this website are trademarks of their respective owners, which are not affiliated with NUX effects & amplifiers. These products and brand names are only listed on this website to describe the instrument being sampled or impulsed.

Input/Outputs
NUX Solid Studio has 6.35mm mono input with input signal level toggle switch (-10dB / +4dB). And it has 3 outputs; simulation dedicated STEREO OUTPUT and DI OUT, and a bypass "THRU" output.

Connection Tips
Solid Studio offers a variety of connection ways and it can fit any desired spot on your signal chain to use all the cabinet/mic simulations efficient.

Gig Saver
- You can place the Solid Studio at the end of your pedal board, and you can send the simulated sound to the mixer while you can send your original signal to the amp. This connection is very useful if the stage (or studio) and cabinet mic-ing conditions are not good enough.

Silent Connection
- Direct connection to mixer or audio interface for recording. It gives more alternative cabinet options to record your favorite amplifier sound, especially if there is no chance to use any loudspeaker.

Advanced Connection
- You can place the Solid Studio between the amp and the cabinet. You can send the loud signal from the amp's cabinet output to the Solid Studio, and you can send the original signal to the cabinet, simulated signal to the mixer/audio interface.

WARNING
When you use the advanced connection method:
The amplifier's speaker output must be connected to the Solid Studio's input by a SPEAKER CABLE
The Solid Studio's THRU output must be connected to the speaker cabinet's input by a SPEAKER CABLE
The Solid Studio's output mode must be selected as SPK (SPEAKER)

Impulse Response (IR) Loader

You can easily emulate the sound of any guitar cabinet by loading different IRs (Impulse Responses) to NUX Solid Studio. The internet is a huge library and you can find many different IR's (both paid and free). And you can add into Solid Studio to use whenever you want. (Currently, we are developing a software for Solid Studio and there will be more information soon)

Technically, the Most Realistic IR Loader: Solid Studio

Solid Studio’s IR resolution is 2048 samples and 46ms . When talking numbers, IR quality is “measured” with the sample resolution, and it’s “scaled” with ms (milliseconds). On this calculation, 1024 samples equal to 20ms capturing length which is currently the respected standard in the market. The best-known and respected profiler gear offers 2048 samples / 40ms length. The highest IR resolution quality or “limit” is 50ms. Unfortunately it doesn’t yield a realistic sound, and what we’re going after is the “real sound!"

So, what makes the Solid Studio unique? It offers 46ms length which means it can perfectly bring back all of the frequencies (including the elusive low-ends). Regarding length, 20ms is certainly capable of capturing a sound profile with an efficient result but it’s not enough to catch the lower frequencies. That’s why high-end IR gear usually provides the 40ms length - it means higher resolution and better quality.

Consider all of the intricate signal-processing that takes place from your guitar to your ear. Solid Studio delivers that signal in the blink of an eye with impeccable accuracy. How? Solid Studio’s high-quality processor / perfect algorithm simply deliver a lightning-fast speed which also limits the signal latency from input-to-output to less than 1 ms.

Why is this so important?

It’s common for IR equipment to have a signal latency coming-in at around 2 ms, and considering that each pedal on the signal-chain lengthens the signal path it further increases the latency. For example: the fastest multi-effect pedal needs 2 ms to deliver the sound, if you add “average” IR equipment to the equation, the latency will be 4ms, that’s ~barely~ workable for a guitar player. If it’s more than 5 ms it’s simply too slow and it’s basically unusable. Less than 1 ms is pretty darn awesome ;)

IR Capture

You can capture any of your favorite amplifiers sound and create your own IR file by Solid Studio. Place the microphone to the front of the speaker and adjust the capturing position as you desire.

How to capture and create an IR file:

- Hold both foot switches, and plug-in the power cable. IR Capture mode will be activated.
- Make the connections between the Solid Studio, amplifier, microphone preamp and the microphone. (Check the IR Capture connection figure above)
- Choose a preset where you want to save your own IR file. (8 cabs * 3 mic positions * 8 mics = 192 patches)
- Press "Cab" foot switch, this will send the impulse signal and it will run from power amp to the speaker. Then your microphone will capture the impact sound and send the signal to the Solid Studio's input.
Your very own IR file is ready to use.

Important note: Update the Solid Studio firmware for using the IR capture function.

€ 205.85

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

Fender 0234506000 ABY switch pedal

ABY switch pedal, red

Own your tone with great-sounding stompboxes

Fender's ABY footswitch with passive switcher allows you to plug a single guitar into two amplifiers or plug two guitars into a single amplifier, making it easy and convenient to create a rig with eminent flexibility and a variety of tone options.

Features:

- True hardwire bypass in the off position lets players retain their natural tone without interference or signal loss.
- “A or B” and “A and B” switching options allow for greater versatility within your rig.
- Durable metal chassis and switches withstand onstage wear and tear.
- LED illumination requires 9-volt battery or power source.

€ 43.05

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen Fender
Product
 

NUX NDD 2 Mini Core Series digitale delay pedaal KONSEQUENT DELAY

digitale delay pedaal KONSEQUENT DELAY

NUX's Konsequent Mini Pedal has re-defined delay!

Excellent digital delay is more than the simple repetition of sound. It’s a dynamic creation of consecutive sound . . . desired consequence. When great sound engineers mix multiple delay onto a guitar recording track, there are some inherent challenges: Increase the rhythmic complexity without losing definition. The desired effects can range from trippy to groovy . . . or a blend of both. Konsequent packs an array of internal processors that replicate the very sound experienced studio engineers were perfecting in the 1980's using expensive rack-mount digital delay systems.

The Konsequent does it at a fraction of the cost, and with the convenience of a mini-pedal.


Features:

NUX's Intelligent Digital Processor, designed to reduce annoying interference caused by audio peak.
NUX's Analog Processor plus Saturation-Simulator offering an abundance of overdrive range.

MODES:

GROOVE PATTERN (Dotted 8). Multi-Delay Output.
REGULAR PATTERN (Simple Delay) Warm, yet purposefully defined

€ 76.15

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX NRV 2 Mini Core Series digitale galm pedaal OCEANIC REVERB

digitale galm pedaal OCEANIC REVERB

NUX Oceanic, a reverb effect as vast and deep as its name !

Its minimalistic design sails past the competition giving you endless parameter choices with one single knob. Studio-grade hardware performance makes it an essential in your arsenal of effects.

Room, Hall, and Square-wave or even Outer-space reverb. It’s all there, with a simple twist of a knob.

Pressing the footswitch activates a green-light indicator, transforming the DECAY knob into a wet/dry mix control.

Demanding guitarists want a reverb that doesn’t drown-out their tone, and Oceanic was designed with this in mind. Instead of dull and shallow you’ll get a deep full-sounding reverb that’s so seamless, you might even forget your jamming with it.

To make Oceanic a great digital reverb pedal, we used a powerful 32-bit DSP to process the complexity of its algorithm. To make it a unique reverb pedal, we programmed loads of studio-sound shaping parameters into that algorithm: Envelope Control, Multi-stage Cascade Diffuser, Multi-band Tone Decay Adjustment, Random Adjustment of Tail-tone Delay, and lots more ! We even built in a compressor mold to help fine-tune your reverb dynamics. NUX is, once again, proud to re-define the mini pedal with Oceanic, a truly extraordinary reverb pedal.

Oceanic can be switched in between true-bypass and buffer bypass.

€ 76.15

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX NDL 2 Mini Core Series loop en drum pedaal JTC DRUM LOOP

loop en drum pedaal JTC DRUM & LOOP

Jam Track Creator Drum&Loop is the Smallest 24bit loop pedal with auto detection drum machine.

After we released the Nux Mini Core pedals and hit the market, we were asked to "please add a loop pedal into this line". So . . . ask and ye shall receive!

With the NUX JTC Drum & Loop Mini, you can choose from 11 built-in drum rhythms, and record up to 6 minutes in 24-bit high-resolution audio quality.

Muti-Function Footswitch

PRESS ONCE: Record/Play/Overdub Loop.
( While playing loop) PRESS & HOLD: Undo/Redo the last layer.
DOUBLE-PRESS: Stop
PRESS & HOLD: Clear Loop.
( Without loop ) PRESS & HOLD for 1.5 sec to play Drum only.
When the Drum is playing, HOLD for 1.5 seconds to Stop the Drum OR just press once to Record Loop.
( While Drum is playing without Loop ), you can SMART TAP TEMPO to control the speed.

*Smart Tap Tempo: PRESS more than twice. If the time distance is less than 1.5 sec (40BPM), JTC interprets as Tap Tempo.

OVERVIEW:

* Smallest 24 bits loop pedal with drum machine.
* 11 Drum patterns in different music styles and Metronome.
* Up to 6 minutes recording, unlimited overdubs.
* Smart Tap Tempo drum machine.
* Drum and Loop volumes can be adjusted separately separately
* Hold the footswitch to use only drum function and control the speed with the footswitch.
* True-bypass and analog dry-through.



Dit product is per 2020-06-18 00:00:00 weer voorradig.

€ 94.25

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX COREDLX B Core Series pedaal bord met METAL CORE DRIVE CORE MODE CORE TIME CORE met gigbag

pedaal bord met METAL CORE + DRIVE CORE + MODE CORE + TIME CORE met gigbag

€ 399.00

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX MG 20 gitaar multi effect pedaal

gitaar multi effect pedaal, 60 effecten, looper, drum patterns, expressie pedaal, SD slot, usb

A Wide Array of Effects

NUX MG-20 comes loaded with 60 beautifully-crafted and newly assembled DSP effects, plus 16 of the most preferred and realistic amp/cabinet emulators. And equipped with high quality essential guitar sounds like overdrive, distortion, compression, EQ, delay, reverb and all modulation effects such as Chorus, Phaser, Flanger, Tremolo and more.

From your guitar to the speakers, your tone is under control!

Noise Gate
MG-20’s built-in noise gate can eliminate the unwanted noise without affecting your tone. Threshold control sets the noise level you want to filter out. Decay parameter lets you adjust how fast the sound fades out when the input signal becomes lower than the set threshold.

Compressor
Compression normalizes the dynamic range of an instrument. MG-20’s compressor makes the output of your guitar more consistent, you can control the compressor sensitivity and output level to adjust the compressor for your essential needs.

Overdrive / Distortion / Fuzz
You can choose one of the 8 drive sounds from Tube Screamer overdrive to Metal Distortion including Fuzz. Each tone has its own characteristic sound and comes with its own parameter controls. This will be your main sound.

Amplifier / Cabinets
You can connect the MG-20 directly to a PA system or audio interface, using the 16 brand new onboard amp and 13 cabinet emulators. Choose from 16 classic amp models all newly and faithfully created to be adjusted exactly as you would with the knobs and switches of the real thing. And pair your amp with one of the 13 cabinet models.

Equalizer
MG-20 comes with 2 types of equalizers. You can tune the frequencies by using 7-band graphic equalizer or 4-band graphic equalizer. 4-band graphic EQ allows you to set which frequency you want to control.

Modulation Effects
MG-20 offers the best selection of modulation effects for high quality sound enhancement. Chorus, Flanger, Phaser and Tremolo and more effects are ready to enhance your sound. Each effect has its own control parameters to customize the effect in all aspects.

Delay
There are 6 types of delay you can choose and customize. Each delay effect comes with Time, Level and Feedback controls and MG-20 also offers Tap sub-division control. You can customize the delay speed by using Time and adjust the amount of repeats by using the Feedback parameters as usual. And it can create a variety of delay patterns by changing the Tap subdivision. Delay speed also can be set by Tap Tempo.

Reverb
MG-20 has 3 types of reverb effects; Plate, Room and Hall. All reverb effects comes with Pre-Delay, Decay, Level and Hi-Cut controls. You can customize any Reverb effect to create an atmospheric sound reflection or it can create a sound like you are playing in a studio or a big concert hall

Quick Access / Additional Control
MG-20 has multi-functional 3 footswitches. You can switch presets, control the drum playing and looper function with 2 main footswitch. And it has one assignable control footswitch “CTRL”, allows you to quick access tone controls and also operate loop station. You can connect one additional external pedal via MG-20’s “EXT. PEDAL” input on the top to get better multi-fx pedal experience.

Expression Pedal
MG-20’s expression pedal controls the master volume and any selected effect / filter in real time. The pedal controls the master volume in default mode and you can switch to control effect parameter by pushing the top of the pedal a bit hard and engage the effect mode. You can assign some additional effects such as Wah and Whammy and adjust easily.

You will never play alone!
Realistic-sounded drums playing the patterns in a variety of different music genres, everything such as pop, rock, blues and more. You can record up to 60 seconds loop track with the selected drum style, MG-20 will be your best band mate. Also it has SD memory card port, it supports mp3 audio format. Also “CTRL” can be assigned as a mp3 players Start/Stop button, everything is under your foot.


Now you are ready to rock!

Large 2.4 inches color TFT LCD
Drum Machine and Loop Station
Tuner
Additional Control Switch
Built-in MP3/WAV Player
User Friendly Interface / Easy Access
Total of 60 Effect Models
36 User Presets + 36 Factory Presets
Output Modes
32-bit Floating Point DSP Processing
USB Port for Updating Software and tone editing.

€ 204.85

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX LOOPCDLX B Core Series loop pedaal bundel LOOP CORE DELUXE met NMP 2 voetschakelaar

loop pedaal bundel LOOP CORE DELUXE met NMP-2 voetschakelaar

A turbo-charged version of our original, and now, the most versatile Looper available!

The Most Versatile

A turbo-charged version of our original, and now, the most versatile Looper available! Sure, we covered all the basics in a Looper that allows you to record and play back multiple layers, but now we've added a whole new level of goodies. Featuring 40 built-in drum patterns and 99 Personal-User memories and now, a whole new array of carefully thought-out user assists. Whether you practice, compose, or play live gigs, you’ll be inspired by the ground-breaking features of the all new NUX Loop Core!

Auto-Start mode waits until you hit the guitar to record.
Record and overdub as many layers as you need, and create an impressive performance with a variety of Start-modes and Finish-modes.

Laying down a loop without a metronome or drum pattern is easy, you can add a drum pattern after you finish your loop and Loop Core automatically processes your tempo to seamlessly add a drum pattern. When you finish your performance you have 3 modes:

1- Double-Tap the foot-switch and Loop Core will stop jamming instantly in Normal mode.
2- Loop Core will play until the end of measurement in Finish Mode.
3- 10-second fade-out in Fade Out mode.


Overall Look on Loop Core
All-in-all you get a total of 6 hours recording time.
Built-in drum patterns withTAP TEMPO
Change the playback tempo of your recorded phrases without changing the key.
Switching phrases without latency, Extensional pedal (optional) for more control.


Put your own music into Loop Core
You can convert any audio file to make it compatible for. You can download the Nux Audio Converter software free. (Check the support page)



Dit product is per 2020-06-18 00:00:00 weer voorradig.

€ 158.80

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX TIMECDLX Core Series delay looper pedaal TIME CORE DELUXE

delay looper pedaal TIME CORE DELUXE

Time Core Deluxe, awesome, user-friendly delay sounds all wrapped up in one little box. You get a total of 7 different delay types offering a wide variety of delay effects from: 40ms Doubled Rock'n Roll delay, then all the way to 1500ms, with an absolutely mesmerizing wash for ambient echo!
Each delay mode has its own characteristic sound, tweak-able to personalize your preset. Fill your lead tone for solos or experience new and interesting ways to enhance rhythm guitar performance.

7 Delay Modes

Tape - Saturated repeats, a tape machine touch
Digital - Crystal clear repeats, best if you use any other modulation effects
Analog - Simulates the BBD algorithm and every repeat of the sound reusing the previous repeat. It comes down to personal taste.
Ping Pong - Repeats will bounce on left and right. Stereo output connection recommended.
Pan - Repeats have a pan algorithm and it will bounce from left to middle and then to right. Stereo output connection recommended.
Reverse - Repeats will play backward. You can explore the dark side of the moon!
Hold - 40 seconds loop station

Tap Tempo
You can customize the delay speed by using Time knob or press and hold the footswitch for 2 seconds to activate TAP TEMPO function.


After you choose a delay mode, Time Knob controls the delay speed, Mix Knob controls the effected signal and dry signal balance and Repeat Knob adjusting the amount of repeats.

Stereo Connection
It has Stereo Inputs and Outputs for a better experience and flexible routing, you can use Time Core Deluxe in any effect chains with different connection methods.

True Bypass / Buffered Tail
Bypass / T-Lock

Time Core Deluxe comes with a 3-way toggle-switch allowing you to change between 2 Bypass modes and NUX’s unique Tone Lock (T-Lock) function.

T-LOCK MODE: A physical dead-man switch designed to protect your parameter tweaks during your performance.

NORMAL MODE: True Bypass which bypasses the effects circuit.

TAIL MODE: Buffered Tail Bypass which maintains the effect of the last note played.



Dit product is per 2020-06-18 00:00:00 weer voorradig.

€ 95.29

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX NOD 3 Mini Core Series overdrive pedaal MONRING STAR OVERDRIVE

overdrive pedaal MONRING STAR OVERDRIVE

Go from Blues-Breaker to Blues-Sky Rocket!

The Morning Star lights up all of the classic aspects of a great blues breaker pedal, but we added something stellar to improve the high-frequencies.

Engage the Morning Star foot-switch to add more overhead with saturated grit to your clean tones, and if you wanna’ boost your high-frequencies to a whole other stratosphere, press/hold the foot-switch to activate the Shine circuit which adds a whole new level of tone brightness.

A Simple Pedal, Loaded with Massive Tone!

0 to 5 on the Drive-Knob yields a balanced overdrive to your clean tone. Tweak it up for thick overdrive with a bit more gain. The tone control has superb tone range from Dark to Morning Star bright. And, whenever you want your blues riffs to light up the skyline, the Shine circuit is always there waiting for your cue to come over the horizon.

You also get 2 bypass options: True Bypass or Buffer Bypass for your essential signal chain needs.

€ 61.45

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX TAPECDLX Core Series tape echo pedaal TAPE CORE DELUXE

tape echo pedaal TAPE CORE DELUXE

The Tape Core pedal! It`s a tribute for the legendary tape echo with a constrict size crystal clear, incredible ambient!

Tape Core. A contemporary stomp box that offers classic Tape Echo tone. Just like the original Tape Echo, the NUX Tape Core features 3 reproduction heads yielding 7 different combinations of delay sounds. All of the natural sound, decay, modulation was created with our cutting-edge NUX TS/AC Technology!

Tape Core is professional, convenient, and designed to echo your vision!

The Original Tape Machine
Here’s how the original Tape-Echo Machine worked:
The Recording Head (which is not needed in our digital version) is on the far left. The ones to the right are what we use to digitally recreate the sound using TS/AC Technology.

And now . . .

The Digital Recreation
As in the original version, 3 Repro-Tape Heads allows for 7 different combinations. The distance between the Repro-Tape Heads determines the delay sound.

Infinite Feedback Feature
The maximum parameters of the REPEAT knob can be used to recreate the classic Infinite Feedback Oscillation effect that was, until now, only available on the physical machine. This trippy sci-fi effect, made popular by artists like Pink Floyd and The Steve Miller Band, allows for super-cool song intros, interludes, and endings.

True Bypass / Buffered Tail
Bypass / T-Lock


Tape Core Deluxe comes with a 3-way toggle-switch allowing you to change between 2 Bypass modes and NUX’s unique Tone Lock (T-Lock) function.

T-LOCK MODE: A physical dead-man switch designed to protect your parameter tweaks during your performance.

NORMAL MODE: True Bypass which bypasses the effects circuit.

TAIL MODE: Buffered Tail Bypass which maintains the effectl of the last note played.

Tape Core Editor
Want to customize your Tape Core Pedal? Experience Tape Core Editor by going to: www.nuxefx.com and download the software. And remember to use DFU to update the firmware (bin) so you can enjoy the ultimate Tape Core Editor experience!

REPRO-HEAD EDITOR
You can edit in Real-Time or Note Pattern mode by using the SYNC slider. This allows you to use actual musical notes to create an infinite combination of groove patterns.


7 COMBO SELECTOR
This is used to re-assign your 7 Combinations, turn On/Off the AUTO TAP, and/or KILL DRY functions.


AUTO TAP
You can use this function to turn On/Off NUX’s patented Smart-Tap Tempo. When not using Smart-Tap Tempo you need to HOLD your foot-switch 2 seconds and wait for LED indicator light to change color then TAP your speed.

With Smart Tap Temp, just start TAPPING, and it automatically knows that anything past 2 TAPS is your desired tempo.


KILL DRY
Dry meaning “ NO EFFECT” and Wet meaning “WITH EFFECTS”, there are situations where you need to “Kill the Dry”, for example: if you connect Tape Core Deluxe to an amp that is already running both the Wet and Dry signal in Parallel ( side-by-side ). The KILL DRY switch allows you to turn On / Off your Dry signal so there are no signal conflicts.


EQ / PARAMETER ADJUST
The original Tape-Echo Machine had adjustment dials that allowed you to tweak some additional parameters: WOW, FLUTTER, BASS, REVERB, SATURATION and TREBLE. So, to get as close to the original as possible, we included them!

€ 95.29

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX CERBERUS gitaar multi effect pedaal

gitaar multi effect pedaal, analoge overdrive + distrotion, digitale modulatie + delay, midi contro

Cerberus is a multi-function effect pedal which can be used standalone or with the 4 cable method and comes packed with extraordinary features including inside routing, IR loader, analog overdrive & distortion and digital effects.

Each feature is another reason to own Cerberus!

Cerberus is a multi-function effect pedal which can be used stand-alone or with the 4 cable method and comes packed with extraordinary features including inside routing, IR loader, analog overdrive & distortion and digital effects.

You can use Cerberus as a stand-alone device to prepare your setup and control as a stomp-box chain and/or save any combinations including routing as a preset and recall by a single click. You can add your essential gears into the chain with using 4 cable method no matter which equipment you use. Cerberus also offers MIDI control to organize your own effect pedals and improve your effects control at the same time.

We've put together 2 selected analog Drive / Distortion pedals, modulation effects and delay & reverb effects. All these sounds and effects were improvised both from the all-time-classic and newly most-liked gears.

Analog Effects:

Overdrive (Blues Breaker): Cerberus Overdrive sound is a tribute to the 70’s Little Wing / Hendrix playing-style. The technology is only about 10 years ago but it quickly became one of the most-preferred overdrive sounds on the market. The Overdrive Channel simply takes your guitar tone to the next level without adding mid-frequencies or any other unwanted characteristics inherent in “Tube Screamer Style” circuits, and provides a transparent overdrive sound. Any pedal can sound amazing but when you create an effect chain, harmonizing the sound is critical for maximum efficiency.

Distortion (Brown Anger): If you prefer high gain distortion with a Classic British flavor, rich bass responses, thick mid-frequencies and a balanced treble response, Cerberus Distortion will soon become one of your all-time-favorite sounds. We’ve also considered compatibility in respect to the Overdrive and Distortion channels. Whether you use distortion standalone or combine with overdrive, when you hit your distortion switch, you’ll feel the classic JCM touch on your sound.

Drive section has analog circuitry with digital control parameters and it remains analog (AD/DA converter starts from the MOD FX section).

Modulation Effects:

Tremolo: Cerberus Tremolo creates authentic vintage tremolo guitar sounds and it is an easy-to-use compact effect but it offers wide parameters for precise effect tailoring.
Phaser: It’s warm, organic, and rarely harsh and burnt-orange phaser. From simple and warm, to tuneful character melodic?
Sleepy psychedelic swirl, with rich high-end harmonics, Cerberus’s Phaser is a joy to use.
U-vibe: For guitarists who really dig the swirling vibes sound-- especially in "vintage" mode, Cerberus’s U-Vibe offers a massive swirl, that’s true, it’s more than “feeling the U-Vibe” sound, you can jump on it. We made sure our U-Vibe effect included the classic favorites, and Cerberus has them ready


Chorus (CE - Analog, SC - Digital, ST - Modern)

CE Chorus: This chorus type is from early years of Chorus effect. There is no any other vintage sound without an analog chorus touch.
SC Chorus: SC Chorus adds a dreamy chorus sound and creates an ambient guitar tone. That’s another alternative chorus if you like a digital touch and to create and ensemble chorus effect.
ST Chorus: This is the most common chorus effect. From clean arpeggios or strumming and fat-drive power chords to sparkling distortion killer solos, Cerberus ST Chorus fills in the gaps to complete your sound.

Delay (60’s, 70’s and 80’s)

60’s Delay (Tape Delay) 55ms - 550ms: Tape delay effects that never get old. We picked a heavy-lift tape echo and shrunk it to add one of the delay modes in Cerberus. In 60’s Delay mode you can create aged over-saturated repeats -- the way tape does!
70’s Delay (BBD) 40ms - 400ms: This mode can handle all or your performance needs if you prefer to use analog-style repeats. It has a decreased modulation so you feel really the popular analog-like BBD sound repeats.
80’s Delay (Digital Delay) 80ms - 800ms: 80’s Delay sounds fantastic is super easy to use. Its simplicity makes it the best mode if you are already using modulation effects, and all you want are crystal clear repeats.

TAP TEMPO
All of the Delay effects provide an original sound and each one has its own delay speed range. When TAP TEMPO is activated, the Time Knob controls the repeat quantize and TAP TEMPO delay range is 125ms - 1500ms for all delay types. And while you tweak the Time Knob, it still allows you to have the original delay time range to emerge infinite feedback, run-away/oscillation as physical tape echo and BBD delay.


Reverb (Plate, Hall and Spring)

Plate Reverb: Plate reverb helps you to have the touch of reverb. If you are in need of a deep ambiance, long decay parameters will give you the deepest but also versatile and organic reverb sound.
Hall Reverb: It offers the spacious feeling of a well-architected performance hall with natural reflections in a studio quality reverb effect.
Spring Reverb: Based on a tank sound, get the warmth and richness of a vintage reverb unit with Cerberus’s Spring Reverb function.


Impulse Response Loader
Cerberus has stereo outputs: one is a dedicated Output with speaker simulation for direct connection to the mixer or your audio interface. When using both Outputs, you can activate or deactivate by pressing the Speaker Cab Sim button. This comes in handy when running 2 amps. The headphone output is cabin simulated and ready-to-play. It can run any 3rd party IR files as well.


Features and Requirements of Cerberus’s IR loader:


Built-in IR: High-Quality 4x12 Closed Back Cabinet
Zero Latency
44.1kHz Sampling Rate, 24-Bit
Max Resolution: 512 Samples
Nux factory cabs and 3rd party IR files can be loaded to Cerberus via Cerberus Editor software (check the support page)

4 Cable Method Connection

You can connect your all-time-favorite gear to Cerberus by placing it between analog and digital sections. You can use any combination of amps or pedals you desire.

More Features
An integrated loop switcher, IR loader, kill dry function, 0 to 20dB volume boost and an accurate tuner into a simple-to-use floor unit. Great tone, ultimate flexibility, easy control, and extreme portability make Cerberus ideal for all players. It also has an additional foot control switch for the selected functions of your choice and you can also connect an expression pedal while it becomes a volume control option before the digital section.

Control switch can be assigned as Reverb, Mod FX, Drive Section Bypass or Clean Boost (0dB - 20dB)

MIDI Implement / Global Settings
When you're using any kind of MIDI-compatible pedals and stompboxes, they are extremely handy when paired with a rack processors or even a guitar effects software. Cerberus provides full MIDI implementations that you can use and combine with any MIDI-supported gear.


€ 307.79

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX NFB 2 Mini Core Series boost pedaal LACERATE FET BOOST

boost pedaal LACERATE FET BOOST

Lacerate is a mini pedal with a huge boost !

The unbelievably simple user-interface comes from our complex Dual FET Circuit Design, but don't worry about what's under the hood. Just enjoy the 1 Simple Control-Knob, 2 Boost Options, and 2 Bypass Modes.

The 2 Boost Modes:

Clean Boost
In the Clean mode, Lacerate only boosts the signal, increasing the volume without any sound colorization. For this reason, Lacerate is one of the cleanest "clean boost" pedals available.

Crank Boost
If you want fat , harmonically rich boost tone, just hold down the foot-switch (1 second) to engage the 2nd stage which adds your overdrive tone. Most boost pedals will only yield about + 20dB maximum, but Lacerate`s Crank mode gives you a whopping + 35dB . From average to huge!

Higher Voltage, Increased Headroom & Dynamic

Lacerate has an integrated voltage-doubler which automatically changes 9V to 18V giving you ginormous headroom and dynamic.

WARNING: To avoid damage to voltage doubler circuit, please ONLY use 9V Power Source. It will handle the conversion.

True Bypass or Buffer Bypass

Doubling the voltage to 18V gives you better dynamic, but it also creates a better headroom buffer.
A lot of professional guitar players start their signal-chain with a stand-alone buffer. Lacerate has an embedded selectable buffer bypass
You can change the bypass mode by turning on the power while holding the footswitch.

Summary:
* True Bypass / Buffer Bypass
* 2 types of boost options (Clean & Crank)
* Dual FET Circuit Design for the most tube-like tone in a transistor design

€ 61.45

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX NOD 2 Mini Core Series overdrive pedaal TUBE MAN MK II OVERDRIVE

overdrive pedaal TUBE MAN MK II OVERDRIVE

Genuine Tube-like sound that makes it more than your average Tube Screamer!

More gain ! That was the overall goal. If you’re not playing through a real tube amp, cranked for overdrive, it’s difficult to get genuine tube overdrive sound.

The original Tube Screamer pedals used an OP-AMP system, a basic circuitry that became popular for its “perfect amp” attributes. It had no distortion so it had to be overdriven or distorted by re-shaping the signal until it distorts ( diode-clipping ). Clipping it a little bit gives you Overdrive. Clipping it a lot gives you Distortion.

But there's a better way!

Using an FET Transistor System, which already has overdrive and distortion capabilities is a better approach to maintain the genuine sound you get from an actual analog tube amp. An FET allows you to bring out the harmonic attributes, and break-up the distortion into a finer grit, the way a real tube does.

Now, your leads will sing richer and longer, and your rhythm will be more open and expressive than ever before. It all culminates into an overdrive that is superbly dynamic, with crisp precise clarity that lets players cut through a dense mix, without losing fat mid-range.


€ 58.80

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX NOD 1 Mini Core Series overdrive pedaal HORSEMAN OVERDRIVE

overdrive pedaal HORSEMAN OVERDRIVE

Two in One Overdrive Pedal
One of the most sought-after dual overdrive pedals produced in the mid '90s is now in one unique pedal design-with a pocket size. NUX Horseman pays homage to the legendary Centaur pedal. There are 3 dials for primary settings and 2 modes: Gold and Silver, and it offers massive headway usually requiring an 18v input.

Gold Mode mimics its classic predecessor; the transparent Gold Centaur overdrive pedal and the Silver Mode is a powered-up version with an extended gain range (Silver Centaur).

NUX Unique Design
The sound is based on the Centaur's voltage converter circuit. But the Horseman's characteristic design is crafted with a built-in OP-AMP voltage-converter driving the 18V to OP-AMP. Higher voltage-supply orders-up more harmonics, and convincingly reproduces the sound of this unique pedal.

Clean Boost
Another “classic” way to use the NUX Horseman. Very useful when used in combination with the amplifiers drive channel (or any other drive pedal). And, depending on the Gain - Output adjustment, it lets the Horseman be used as a clean boost. Dial-up a low-gain with a high output setting, and it adds mostly volume and minimal color to your sound.

Natural Distortion
Additionally, the controls can be set to distort the sound signal in the pedal, where two Schottky diodes can perform a waveform clipping. ( The germanium diodes are discontinued, we especially select the Schottky diodes to replicate the waveform clipping ) The "gain" knob is a double potentiometer (a "dual-ganged gain pot"), which controls bass and middle frequencies. Treble and volume are each controlled with separate knobs.

True/Buffer Bypass
NUX Horseman has an optional bypass mode. You can use the pedal in True Bypass mode to keep your signal untouched when the pedal is OFF in the chain. We highly recommend to select buffer bypass mode if you have more than 4 pedals connected together; switch to Buffer Bypass mode and there will be no signal loss in your pedal chain!

Push and hold the footswitch and power-up the pedal; the LED indicator will show which bypass mode is activated; RED - True Bypass / GREEN - Buffer Bypass.


€ 75.09

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX NDS 2 Mini Core Series distortion pedaal BROWNIE DISTORTION

distortion pedaal BROWNIE DISTORTION

Shopping for a British distortion pedal? Try the NUX Brownie!
The Classical British rock tones of the 1970’s, packed into one little box.

How it works?

By using a hybrid of circuits, we created truly unique pre-amp and power tube distortion characteristics. You’ll be amazed to hear the warm, organic tone that’s reproduced.

Brownie has a specially designed BJT input stage causing it to “break-up” when the preamp tube starts to distort. It also has an asymmetrical clipping circuit letting you simulate some of the characteristics of an actual tube amplifier. It also keeps the bottom-end tight by processing bass frequencies which can get muddy when distorted.

Nux Brownie uses a low-pass tone control filter to simulate the Variac effect (by lowering the voltage going into the amplifier) for rounding-off your tone. The range of tone is controlled yet perfect for dialing-in the high-end response.

The power clipping circuit is crafted from a modern low-noise op-amp and 2 red LEDs. It can create symmetrical clipping that distorts both halves of the signal keeping the sound smooth. True bypass circuits with a high quality TPDP mechanical foot-switch gives the bypass its phenomenal signal clarity.

€ 58.80

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product
 

NUX DRICDLX Core Series overdrive pedaal DRIVE CORE DELUXE

overdrive pedaal DRIVE CORE DELUXE

The Original 4-Knob 2-Circuit Tube Screamer!

We’re not only the first in this category, we were always the most versatile, and now we’ve taken it a giant step further.


Blues to the Core!

All-time favorite tube-screamer circuit comes with more features and additional dial-up options. Drive Core Deluxe is an analog overdrive pedal which can carry your signal in 3 different ways for your essential needs. You can use the pedal as a Clean Boost or Overdrive or you can Mix up the clean signals with tube heated drive sound. The Tone knob gives the last shape to your signal and controls the balance between low-and-high frequencies.

3 Way Toggle-Switch
If you’re going to have separate Clean / Overdrive Tweak Knobs you need an easy way to mix them together quickly! We were the pioneers of the 3-Way Toggle Switch, which means we had a whole lot more time than our competitors to fully maximize this feature. ?


3 POSITIONS:

Top Position: CLEAN BOOST
This activates the Clean Boost Knob which controls your clean gain. You can also bring your Volume up or down with the Level Knob (0db to 20db). No need to adjust the Tone; we set this at: “As Clean as it Gets!” so the Tone Knob is inactive in this mode.

Bottom Position: DRIVE
Activates the Drive Boost Knob. You can also bring your Volume up or down with the Level Knob ( 0db to 20db ), and you can dial-in your Tone Knob for the Drive Tone ( EQ frequencies ) of your choice .


Middle Position: MIX
Allows you to adjust the blend of both the Clean & Drive simultaneously.

That’s so cool, it needs no description!

Drive Mode Knob
The Dynamic Drive Knob is also a Push Knob, which controls the drive gain parameters. Crank your sound from low-gain to high-gain, and feel your tube-heated settings in turbo-charged mode.


True Bypass
Use as a stand-alone or combine with any other gear. True Bypass lets you activate, or truly de-activate Drive Core Deluxe without interfering with other effects in the chain.

€ 73.75

Meerinformatie

Muziekinstrumenten Gitaar effectpedalen NUX
Product