Hosco Japan H FSW060 fret slot saw

fret slot saw, carbon steel, thickness: 0,60 mm, universal cutting teeth, tooth spacing 1.25mm

Fret slot saw with universal cutting teeth. Accurate and durable.

Handle length 180 mm, saw blade 120 mm long. Thickness 0,60 mm

€ 59.00

Meerinformatie

Muziekinstrumenten Work bench tools Hosco Japan
Product
 

Hosco Japan H TL FF2 fret crowning file

fret crowning file, for standard frets


total length: 195mm
file length: 105mm




Dit product is per 2020-07-06 00:00:00 weer voorradig.

€ 50.30

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H SB 3 radius sanding block for shaping fingerboard 14 and 16 radius

radius sanding block for shaping fingerboard 14"and 16" radius

Radius 14" /356 mm and 16" / 406 mm.
80 mm x 150 mm. Sanding area is 65 mm x 150 mm.

This double sides radiused sanding block will follow the radius of your fingerboard.

For shaping fingerboards, stick our KCR100 to KCR240 self adhesive sandpaper to this block.
For levelling frets use some less agressive grit KCR240 to KCR400 or even KCR600 self adhesive sandpaper.

The radius of your fingerboard can be measured with our H-RG1B radius gauge.

€ 31.25

Meerinformatie

Muziekinstrumenten Geen categorie match Hosco Japan
Product
 

Hosco Japan H FH L fret hammer two heads

fret hammer two heads, plastic/steel, weight: 225gr, head diameter: 25mm x 75mm, length: 330mm

Fret hammer with one plastic and one steel head. Use the plastic head for fret work.

€ 39.39

Meerinformatie

Muziekinstrumenten Work bench tools Hosco Japan
Product
 

Hosco Japan H GB4 Groobar

Groobar, aid to determine nut slot height, 4/set

Filing the nut slots down can be tricky. These Groobars are the perfect help to prevent filing the nut slot too deep. Four non-hardened steel bars in different thicknesses.

L 1,07mm / 0.042"
L 1,27mm / 0.050"
M 1,42mm / 0.056"
H 1,65 mm / 0.065"

€ 38.05

Meerinformatie

Muziekinstrumenten Work bench tools Hosco Japan
Product
 

Hosco Japan H FF1 compact fret crown file

compact fret crown file, small (R:1mm) coarse cut and fine cut sides, blue

€ 43.89

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H FPR SET fret polishing rubbers 4 set

fret polishing rubbers 4/set, 150-180- 400-1000 grit, polishes small scratches and dirty frets

Set of 4 fret polishing rubbers.

150-180-400-1000 grit.

Easy and fast fret polishing tool. Erasing the small scratches of the fret polishing or cleaning dirty frets.
Because of this softness, rubber fits to fret arch perfectly. Also soft rubber keeps the fingerboard damage to a minimum.
Easy to cut this rubber by cutter knife for your fret work. This is a great rust remover and polisher!

€ 36.25

Meerinformatie

Muziekinstrumenten Geen categorie match Hosco Japan
Product
 

Hosco Japan H TL NF3A nut slotting files set of 3 pcs acoustic guitar

nut slotting files set of 3 pcs acoustic guitar, 016"/042", 026: / 050, 036:/ 055"

Set of 3 double-function nut files. Suitable for most acoustic steel-string guitars.

Red file .016" and .042" for E and D string
Blue file .026" and.050" for B and A string
Yellow file .036" and .055" for G and E string

Alternative is to use single files H-NF- for each string gauge or the 10-file set H-NF10 or 11-file set H-NF11.

total length: 190 mm
file length: 100mm



Dit product is per 2020-07-06 00:00:00 weer voorradig.

€ 94.50

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H IDP 156 dual grit mini diamond plates

dual grit mini diamond plates, for honing sharp fret ends and sharpening knives, 150/600 grit

This compact dual grit diamond plate is ideal for honing sharp fret ends or for sharpening tools.
The diamond surface makes for clean, precise and fast filing. The material is very durable and this file will last a very long time. Diamond files work on both strokes, back and forth. It will leave a smoother surface without chattering.

One side is 150 grit, the other side is 600 grit. size:30 x 100 mm



Dit product is per 2020-07-06 00:00:00 weer voorradig.

€ 30.00

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H TL FF3 fret crowning file

fret crowning file, for jumbo frets


total length: 195mm
file length: 105mm




Dit product is per 2020-07-06 00:00:00 weer voorradig.

€ 50.30

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H FE2 fret end file (pencil like shape) for precise filing

fret end file (pencil like shape) for precise filing, for medium frets (R=2mm)

Three files in one! One concave, one fine toothed side and one extra fine toothed side.

The concave fret end file is the perfect tool to use after bevelling the fret ends.
This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 2 mm.
The sides have one fine and one superfine file surface as well to use in removing burrs.
Length 16 cm

This H-FE2 is for medium frets.

€ 53.00

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H TL FF1 fret crowning file

fret crowning file, for narrow frets, ukulele and mandolin


total length: 195mm
file length: 105mm




Dit product is per 2020-07-06 00:00:00 weer voorradig.

€ 50.30

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H NF 042 nut file 15 cm length

nut file 15 cm length, teeth per inch: 78, 042" / 1,07 mm

A high quality nut file. A string seated in a properly filed nut will have the correct height and will also prevent extraneous string noise from the nut.

0.042" / 1,07 mm width.

A typical set for classical guitar would contain the following files:

0.028", 0.032", 0.036", 0.042"

A typical set for electric and acoustic guitars will depend on the string gauges. Always check the package for the string gauges and use the same file gauge accordingly.
A great aid in filing nuts is the H-GB4 Hosco GrooBar. This will prevent you from filing the string slot too deep.

€ 26.25

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H NF10 set of 10 thin nut files

set of 10 thin nut files

Set of 10 high quality nut files. The most common thicknesses are included in this set. This set will ensure a proper seated string that not only is set at the correct height, but will also prevent string noise from the nut.

Files: 010", 013", 016", 024", 028", 032", 036", 042", 046", 056"
Files: 0,25 mm, 0,33 mm, 0,41 mm, 0,61 mm, 0,71 mm, 0,81 mm, 0,91 mm, 1,07 mm, 1,17 mm, 1,42 mm

A great aid in filing nuts is the H-GB4 Hosco GrooBar. This will prevent you from filing the string slot too deep.

€ 153.90

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H NF11 set of 11 thin nut files

set of 11 thin nut files

Set of 11 high quality nut files. The most common thicknesses are included in this set, inlcuding a .050" This set will ensure a proper seated string that not only is set at the correct height, but will also prevent string noise from the nut.

Files: 010", 013", 016", 024", 028", 032", 036", 042", 046", 050 ", 056"
Files: 0,25 mm, 0,33 mm, 0,41 mm, 0,61 mm, 0,71 mm, 0,81 mm, 0,91 mm, 1,07 mm, 1,17 mm, 1,27 mm, 1,42 mm

A great aid in filing nuts is the H-GB4 Hosco GrooBar. This will prevent you from filing the string slot too deep.

€ 170.10

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H FL160S fret levelling file

fret levelling file, 160 mm (L) x 28mm (W) x 5 mm (D), single cut teeth per inch: 20 cut

€ 33.75

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H FC190 fret cutter

fret cutter, high carbon steel, blade width 26mm, not suitable for stainless steel frets

This fret cutter was developed at the factory that has 85 years of history in making cutting pliers by Japanese traditional manufacturing methods.
The material is special steel which we call high carbon tool steel.
190 mm total length with a 26 mm blade width.
Flat and sharp cutting edges makes very flat fret end.

This is not suitable for stainless steel frets. Please use H-FC28SS for that.

€ 62.50

Meerinformatie

Muziekinstrumenten Work bench tools Hosco Japan
Product
 

Hosco Japan TL HMF S bronze fretting hammer

bronze fretting hammer, flat sides and curved side, total length 300 mm

€ 40.39

Meerinformatie

Muziekinstrumenten Work bench tools Hosco Japan
Product
 

Hosco Japan GTPM 30 guitar tech padded mat

guitar tech padded mat, with magnetised storing area for small parts

The workbench mat is made of 5mm PE foam with a PVC cover. non-slip PVC at the backside.
The 6 cm/2,25" width of the front edge is able to fold down at the edge of the bench to secure the mat and provide more comfort to you. In the two upper corners we have added magnet into the mat. This will help to keep small screws, nuts, small hardware in place.
This is the ideal mat for every luthier!
Size: 120 cm x 50 cm

€ 43.89

Meerinformatie

Muziekinstrumenten Work bench tools Hosco Japan
Product
 

Hosco Japan H FE3 fret end file (pencil like shape) for precise filing

fret end file (pencil like shape) for precise filing, for wide frets (R=3mm)

Three files in one! One concave, one fine toothed side and one extra fine toothed side.

The concave fret end file is the perfect tool to use after bevelling the fret ends.
This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 1 mm.
The sides have one fine and one superfine file surface as well to use in removing burrs.
Length 16 cm

This H-FE3 is for wide frets.

€ 53.00

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H SB 2 radius sanding block for shaping fingerboard 10 and 12 radius

radius sanding block for shaping fingerboard 10" and 12" radius

Radius 10" /254 mm and 12" / 305 mm.
80 mm x 150 mm. Sanding area is 65 mm x 150 mm.

This double sides radiused sanding block will follow the radius of your fingerboard.

For shaping fingerboards, stick our KCR100 to KCR240 self adhesive sandpaper to this block.
For levelling frets use some less agressive grit KCR240 to KCR400 or even KCR600 self adhesive sandpaper.

The radius of your fingerboard can be measured with our H-RG1B radius gauge.

€ 31.25

Meerinformatie

Muziekinstrumenten Geen categorie match Hosco Japan
Product
 

Hosco Japan TBP 3450NSM Tiny Boy highend travel bass natural

Tiny Boy highend travel bass natural, fretless, maple/mahogany body, maple neck, ebony fb, gigbag

This fretless bass will amaze you and your audience! The special flatwound strings and the luxurious ebony fingerboard feel great and are essential to this quintessential fretless sound. The fret indications are inlaid wooden strips to facilitate your intonation.
The mahogany body with plain maple top sound rich and with a lot of detail.
The small size makes this tiny boy bass incredibly comfortable to play. A professional instrument with a tight low end and incredibly good playability.

A joy to play and a revelation to hear!
Japanese parts and well seasoned wood.

Specifications

body : mahogany with maple top
neck : Canadian maple
fingerboard : ebony, fretless
fret markers : maple
machine heads : Gotoh
electronics : Japan
pickups : PB style
neck finish : satin
body finish ; gloss natural

scale length : 580 mm / 23"
nut width : 40,5 mm
fretless
bag : including high quality gigbag

€ 612.95

Meerinformatie

Muziekinstrumenten Basgitaar Hosco Japan
Product
 

Hosco Japan H NF 046 nut file 15 cm length

nut file 15 cm length, teeth per inch: 78, 046" / 1,17 mm

A high quality nut file. A string seated in a properly filed nut will have the correct height and will also prevent extraneous string noise from the nut.

0.046" 1,17 mm width.

A typical set for classical guitar would contain the following files:

0.028", 0.032", 0.036", 0.042"

A typical set for electric and acoustic guitars will depend on the string gauges. Always check the package for the string gauges and use the same file gauge accordingly.
A great aid in filing nuts is the H-GB4 Hosco GrooBar. This will prevent you from filing the string slot too deep.

€ 26.25

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product
 

Hosco Japan H SB 4 radius sanding block for shaping fingerboard 15 and 20 radius

radius sanding block for shaping fingerboard 15" and 20"radius

Two radii: 15" /381 mm and 20" / 508 mm.
80 mm x 150 mm. Sanding area is 65 mm x 150 mm.

This double sides radiused sanding block will follow the radius of your fingerboard.

For shaping fingerboards, stick our KCR100 to KCR240 self adhesive sandpaper to this block.
For levelling frets use some less agressive grit KCR240 to KCR400 or even KCR600 self adhesive sandpaper.

The radius of your fingerboard can be measured with our H-RG1B radius gauge.

€ 31.25

Meerinformatie

Muziekinstrumenten Geen categorie match Hosco Japan
Product
 

Hosco Japan H TL NF3B nut slotting files set of 3pcs electric bassguitar

nut slotting files set of 3pcs electric bassguitar, 045"/085", 065"/105", 075"/130"

Set of 3 double-function nut files. Suitable for most bass guitars.

Red file .045" and .085"
Blue file .065" and .105"
Yellow file .075" and .130"

Alternative is to use single files H-NF- for each string gauge or the 10-file set H-NF10 or 11-file set H-NF11.

total length: 190 mm
file length: 100mm



Dit product is per 2020-07-06 00:00:00 weer voorradig.

€ 94.50

Meerinformatie

Muziekinstrumenten Vijlen Hosco Japan
Product